Licensed & insured · Deck, fence & porch builders across 30 Western New York communities Mon–Fri · 9am–5pm ET · (716) 576-3250

Category: Pricing

  • Five things that quietly raise a deck quote

    The Deck Journal / Pricing

    Five things that quietly raise a deck quote

    MK Mike Kowalski, Founder
    May 28, 2026 · 6 min read
    Built-in bench seating integrated into a deck railing

    Square footage and material grade get most of the attention, but a handful of quieter details move the number more than people expect. Here’s what to ask about up front.

    Height and stairs. A deck more than a few feet off the ground needs additional framing, stair stringers, and often a mid-rail landing. Each adds real material and labor.

    Railing choice. As covered elsewhere, rail can run from $40 to $160+ per linear foot depending on material. On a wraparound deck it’s easy for railing to rival the decking cost.

    Ledger conditions. If your siding needs to be cut back and properly flashed to attach the ledger, which is the right way to do it, always, that’s additional carpentry the quote should show as its own line.

    Access. A backyard reachable only by hand-carrying lumber around the house, versus one with truck access, changes labor hours meaningfully.

    Footing count. More footings than expected usually means the original layout assumed spans wider than code allows for our snow loads. It’s a correction, not an upsell, and we’ll explain exactly why each one is there.

    Want your number, not a ballpark?

  • What a new deck costs in Buffalo: the 2026 guide

    The Deck Journal / Pricing

    What a new deck costs in Buffalo: the 2026 guide

    MK Mike Kowalski, Founder
    Aug 4, 2026 · 9 min read
    Large two-tone composite deck installation

    Every week someone calls and asks the only question that matters: “Ballpark, what’s this going to cost me?” Here are the real numbers from our last 60 builds, and what moves them.

    The short answer

    Most new decks we build land between $9,500 and $32,000. A 12×16 pressure-treated deck with a standard rail sits near the bottom. A 400-square-foot composite deck with cable rail, lighting, and a privacy wall sits near the top.

    2026 averages · per square foot, installed

    Pressure-treated lumber$38 – $52
    Cedar$52 – $70
    Composite (Trex, TimberTech)$62 – $95
    Repair / restoration (typical job)$1,200 – $6,500

    What moves the price in WNY specifically

    Footings. Our frost line is 48 inches, deeper than most of the country, and Amherst-style clay soil means more concrete per pier. Budget roughly $350–500 per footing, and a typical deck needs six to nine.

    Snow-load framing. We size joists for lake-effect accumulation, which can add 10–15% in lumber over a southern build of the same footprint. It’s the difference between a deck and a Buffalo deck.

    The railing. The line item everyone forgets. A basic wood rail might be $40 per linear foot; aluminum runs $85–120; cable rail $120–160. On a wraparound deck the rail can cost more than the boards.

    “Composite costs 30–40% more the day we build it, and roughly nothing every year after. Wood is cheaper twice: once at the register and once more if you sell before the first re-stain.”

    How to use these numbers

    Measure your footprint, multiply by the per-foot range for your material, then add the rail by linear foot. If your number and our quote are far apart, ask us why. The answer will be specific, because the quote is itemized. That’s the whole point.

    Want your number, not a ballpark?